hodmech@annauniv.edu 044 2235 7744

Latest Journals (Scopus indexed)

  1. A.K. Agarwal, C. Mounaïm-Rousselle, P. Brequigny, A. Dhar, C. Hespel, C. Patel, D.K. Srivastava, G. Duraisamy, L. Le Moyne, N. Sharma, N. Labhasetwar, P. Singh, P. Das, P.K. Panigrahi, P.C. Shukla, P. Sakthivel, S.V. Mohan, S. Panigrahy, S. Sen and H. Valera, Future of internal combustion engines using sustainable, scalable, and storable E-fuels and biofuels for decarbonizing transport and enabling advanced combustion technologies, Progress in Energy and Combustion Science, 2025 Future of internal combustion engines using sustainable, scalable, and storable E-fuels and biofuels for decarbonizing transport and enabling advanced combustion technologies .
  2. A.K. Subramani, G. Duraisamy and A. Krishnasamy, The potential of emulsified diesel ammonia solution as high reactivity fuel in compression ignition of gasoline, International Journal of Hydrogen Energy, 2025 The potential of emulsified diesel ammonia solution as high reactivity fuel in compression ignition of gasoline : pp677-689 .
  3. D. Sarukasan and K. Thirumavalavan, Investigations of surface characteristics on AA5083 alloy with dual treatment, Surface Engineering, 2025 Investigations of surface characteristics on AA5083 alloy with dual treatment (2) : pp279-292 .
  4. G.R. Kannan, P. Sathiya, T.D.B. Kannan and M. Umar, Experimental Investigation on Microstructure and Mechanical Properties of 15CDV6 High Strength Low Alloy Steel Welded Using Spin Arc Gas Metal Arc Welding Process, Journal of Materials Engineering and Performance, 2025 Experimental Investigation on Microstructure and Mechanical Properties of 15CDV6 High Strength Low Alloy Steel Welded Using Spin Arc Gas Metal Arc Welding Process (6) : pp4573-4586 .
  5. I. Jeevarathinam, K. Vellaisamy and M.D. Dinesh Muthamil Raja, Role of thermal additive and coating on the solidification characteristics of phase change materials – An experimental study, Applied Thermal Engineering, 2025 Role of thermal additive and coating on the solidification characteristics of phase change materials – An experimental study .
  6. J.J. Rino, A.S. Vivekananda, N. Thangapandian and B.P. Shanmugavel, Mechanical and Wear Behavior of Al-Si5Cu3/ZrB2 In-Situ Reinforced Metal Matrix Composite, International Journal of Metalcasting, 2025 Mechanical and Wear Behavior of Al-Si5Cu3/ZrB2 In-Situ Reinforced Metal Matrix Composite (2) : pp749-760 .
  7. K. Raman and V.S. Senthil Kumar, Extensive analysis of the mechanical and microstructural properties of AA2024 alloy surface enhancement via friction stir processing, Journal of Adhesion Science and Technology, 2025 Extensive analysis of the mechanical and microstructural properties of AA2024 alloy surface enhancement via friction stir processing (4) : pp523-554 .
  8. K. Senthilnathan, K. Thirumavalavan and P. Sivaraj, Influence of tool rotational speed on microstructural characteristics and mechanical properties of friction stir processed AA5754 aluminium alloy under overlap configuration, Materials Research Express, 2025 Influence of tool rotational speed on microstructural characteristics and mechanical properties of friction stir processed AA5754 aluminium alloy under overlap configuration (7) .
  9. K. Srithar, M. Rishidev, M. Kaveri and R. Saravanan, Experimental evaluation of cold storage performance coupled with an insert incorporated air heater and Humidification Dehumidification (HDH) system, International Journal of Thermofluids, 2025 Experimental evaluation of cold storage performance coupled with an insert incorporated air heater and Humidification Dehumidification (HDH) system .
  10. K. Srithar, P. Udhayakumar, M.C. Sundhar, P. Guru Baskar, R. Hemakumar and R. Saravanan, Photovoltaic panel with bottom-mounted air cooling system, Cleaner Engineering and Technology, 2025 Photovoltaic panel with bottom-mounted air cooling system .
  11. K. Srithar, R. Venkatesan, S.A. Immanuel, M. Krishkarna and R. Saravanan, Chest freezer with integrated heat exchanger for augmenting the COP, International Journal of Thermofluids, 2025 Chest freezer with integrated heat exchanger for augmenting the COP .
  12. K. Thirumavalavan, S. Sudharson and D. Sarukasan, An experimental investigation on AA5083 alloy shot peening surface characteristics, Surface Engineering, 2025 An experimental investigation on AA5083 alloy shot peening surface characteristics (1) : pp78-91 .
  13. M. Mohan, A. S.C., M. Radhakrishnan, T. Krishnamurthy and A. Thirugnanasambandam, Experimental investigations and process optimisation of the submerged waterjet peening process on AZ31B Mg alloy for biomedical applications, Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications, 2025 Experimental investigations and process optimisation of the submerged waterjet peening process on AZ31B Mg alloy for biomedical applications .
  14. M. Mohan, T. Krishnamurthy, M. Radhakrishnan and A. Thirugnanasambandam, Surface topographical and morphological features of submerged waterjet peened AZ91D Mg alloy surfaces – A preliminary study, Manufacturing Letters, 2025 Surface topographical and morphological features of submerged waterjet peened AZ91D Mg alloy surfaces – A preliminary study : pp42-49 .
  15. M. Rangasamy, P. Kesavan, Y. Vaidhiyanathan, G. Duraisamy and C. Augustin V, IMPACT OF OPERATING PARAMETERS ON ENERGY EFFICIENCY AND REGULATED EMISSIONS OF DUAL FUEL DIRECT INJECTED REACTIVITY-CONTROLLED COMPRESSION-IGNITION COMBUSTION, Energy Sources Part A Recovery Utilization and Environmental Effects, 2025 IMPACT OF OPERATING PARAMETERS ON ENERGY EFFICIENCY AND REGULATED EMISSIONS OF DUAL FUEL DIRECT INJECTED REACTIVITY-CONTROLLED COMPRESSION-IGNITION COMBUSTION (1) : pp7361-7382 .
  16. A. Ashothaman, J. Sudha, N. Senthilkumar and K. Palanikumar, Evaluation of polylactic acid polymer composites strengthened with chopped vetiver fiber and pearl millet-derived- nano silica towards environmental sustainability, Journal of Polymer Research, 2024 Evaluation of polylactic acid polymer composites strengthened with chopped vetiver fiber and pearl millet-derived- nano silica towards environmental sustainability (11) .
  17. A. Mystica, V.S. Senthil Kumar, S. Harinivas and K. Raman, Sustainability and life cycle assessment of friction stir welding on AA2014 alloy under different conditions, Utilizing Friction Stir Techniques for Composite Hybridization, 2024 Sustainability and life cycle assessment of friction stir welding on AA2014 alloy under different conditions : pp366-381 .
  18. A. Sathishkumar, P. Sundaram, S.P. Ranga, P.G. Kumar, M. Cheralathan and R. Velraj, Role of aloe vera based nanofluids for cool thermal energy storage system: A comparative study, Journal of Energy Storage, 2024 Role of aloe vera based nanofluids for cool thermal energy storage system: A comparative study .
  19. A. Shyam, K.R.A. Ahmed, S.S. Christopher and S. Iniyan, Thermal performance enhancement in a solar parabolic trough collector with optimized secondary optics, Clean Technologies and Environmental Policy, 2024 Thermal performance enhancement in a solar parabolic trough collector with optimized secondary optics (3) : pp771-784 .
  20. A.K. Hossain, V. Sharma, C. Serrano, A. Krishnasamy and D. Ganesh, Production of biofuel from AD digestate waste and their combustion characteristics in a low-speed diesel engine, Renewable Energy, 2024 Production of biofuel from AD digestate waste and their combustion characteristics in a low-speed diesel engine .
  21. A.K. Subramani, G. Duraisamy, N. Govindan and A.K. Hossain, An innovative method of ammonia use in a light-duty automotive diesel engine to enhance diesel combustion, performance, and emissions, International Journal of Hydrogen Energy, 2024 An innovative method of ammonia use in a light-duty automotive diesel engine to enhance diesel combustion, performance, and emissions : pp38-58 .
  22. B. Karthikeyan, G. Praveen Kumar, R. Saravanan, A. Coronas, R. Narayanan and R. Girimurugan, Solar powered cascade system for sustainable deep-freezing and power generation - exergoeconomic evaluation and multi-objective optimization for tropical regions, Thermal Science and Engineering Progress, 2024 Solar powered cascade system for sustainable deep-freezing and power generation - exergoeconomic evaluation and multi-objective optimization for tropical regions .
  23. C. Janarthanan, R. Muruganandhan and K. Gopkumar, Design and multi-body dynamic analysis of inline and offset track configuration in deep-sea mining vehicles for enhanced traction in soft seabed, Journal of Terramechanics, 2024 Design and multi-body dynamic analysis of inline and offset track configuration in deep-sea mining vehicles for enhanced traction in soft seabed .
  24. C. Janarthanan, R. Muruganandhan, K. Gopkumar and G.A. Ramadass, Configurations of tracked vehicle for development of subsea mining machines with improved mobility on soft soil, Indian Journal of Geo Marine Sciences, 2024 Configurations of tracked vehicle for development of subsea mining machines with improved mobility on soft soil (5) : pp398-408 .
  25. C. Rathinasuriyan, R. Sankar, M. Puviyarasan, V.S. Senthil Kumar and K. Palanikumar, Influence of cooling medium on microstructure and mechanical properties in friction stir processing of magnesium alloy-a review, Surface Review and Letters, 2024 Influence of cooling medium on microstructure and mechanical properties in friction stir processing of magnesium alloy-a review .
  26. D. Parthipan, B. Dharmalingam, S. Sankaran and D. Rajagopal, Effect of phase change material in cross flow and jet impingement cooling techniques used in heat sink for electronics application, Numerical Heat Transfer; Part A: Applications, 2024 Effect of phase change material in cross flow and jet impingement cooling techniques used in heat sink for electronics application .
  27. D. Sarukasan and K. Thirumavalavan, INVESTIGATION OF MECHANICAL AND DEGRADATION CHARACTERISTICS OF FILAMENT-WOUND COMPOSITE PIPES INCORPORATING BASALT/E-GLASS HYBRID REINFORCEMENT, Composites Theory and Practice, 2024 INVESTIGATION OF MECHANICAL AND DEGRADATION CHARACTERISTICS OF FILAMENT-WOUND COMPOSITE PIPES INCORPORATING BASALT/E-GLASS HYBRID REINFORCEMENT (2) : pp141-154 .
  28. D. Sarukasan and K. Thirumavalavan, Influencing laser shock peening treatment of the mechanical, tribological, corrosion, and microstructural characteristics on AA5052 alloy, Surface Engineering, 2024 Influencing laser shock peening treatment of the mechanical, tribological, corrosion, and microstructural characteristics on AA5052 alloy (9-10) : pp945-966 .
  29. D. Subramaniam, R. Natesan, B.P. Shanmugavel and K. Manivasakan, Performance evaluation of Meliadubia/Polypropylene composite crates for tomatoes packaging under simulated vibration, Food Packaging and Shelf Life, 2024 Performance evaluation of Meliadubia/Polypropylene composite crates for tomatoes packaging under simulated vibration .
  30. G.R. Kannan, P. Sathiya, T.D.B. Kannan and M. Umar, Experimental Investigation on Microstructure and Mechanical Properties of 15CDV6 High Strength Low Alloy Steel Welded Using Spin Arc Gas Metal Arc Welding Process, Journal of Materials Engineering and Performance, 2024 Experimental Investigation on Microstructure and Mechanical Properties of 15CDV6 High Strength Low Alloy Steel Welded Using Spin Arc Gas Metal Arc Welding Process .
  31. I. Jeevarathinam, K. Vellaisamy, M.D. Dinesh Muthamil Raja and P. Marimuthu, Development of water-based micro-particle enhanced phase change material for cool thermal energy storage systems, Energy Sources, Part A: Recovery, Utilization and Environmental Effects, 2024 Development of water-based micro-particle enhanced phase change material for cool thermal energy storage systems (1) : pp12989-13002 .
  32. J. Arivarasan and T.D.B. Kannan, MECHANICAL AND METALLURGICAL CHARACTERISATION OF DOUBLE PULSE MIG WELDED IN 617- SS 304 H, Advances in Materials and Processing Technologies, 2024 MECHANICAL AND METALLURGICAL CHARACTERISATION OF DOUBLE PULSE MIG WELDED IN 617- SS 304 H (2) : pp1182-1206 .
  33. J.J. Rino, A.S. Vivekananda, N. Thangapandian and B.P. Shanmugavel, Mechanical and Wear Behavior of Al-Si5Cu3/ZrB2 In-Situ Reinforced Metal Matrix Composite, International Journal of Metalcasting, 2024 Mechanical and Wear Behavior of Al-Si5Cu3/ZrB2 In-Situ Reinforced Metal Matrix Composite .
  34. K. Muninathan, M. Venkata Ramanan, N. Monish and G. Baskar, Economic analysis and TOPSIS approach to optimize the CI engine characteristics using span 80 mixed carbon nanotubes emulsified Sapindus trifoliatus (soapnut) biodiesel by artificial neural network prediction model, Applied Energy, 2024 Economic analysis and TOPSIS approach to optimize the CI engine characteristics using span 80 mixed carbon nanotubes emulsified Sapindus trifoliatus (soapnut) biodiesel by artificial neural network prediction model .
  35. K. Rithika and J. Sudha, Additive Manufacturing of Fiber-Reinforced Composites—A Comprehensive Overview, Polymers for Advanced Technologies, 2024 Additive Manufacturing of Fiber-Reinforced Composites—A Comprehensive Overview (12) .
  36. K. Srithar, R. Venkatesan, M. Kaveri, M. Rishidev and R. Saravanan, The impact of insert configurations on heat transfer in air heating systems, Experimental Heat Transfer, 2024 The impact of insert configurations on heat transfer in air heating systems .
  37. K. Srithar, R. Venkatesan, M. Rishidev and R. Saravanan, Optimizing humidifier performance by modifying packing material location and thickness, Desalination and Water Treatment, 2024 Optimizing humidifier performance by modifying packing material location and thickness .
  38. K.R. Arshad Ahmed, J.P. Naveen Kumar, A. Shyam and S.S. Christopher, Numerical investigation in an indirect concentrated solar thermal dryer incorporated with discrete mirrors, Numerical Heat Transfer; Part A: Applications, 2024 Numerical investigation in an indirect concentrated solar thermal dryer incorporated with discrete mirrors .
  39. M. Avadi Ammal and J. Sudha, Optimization of process parameters for improved surface characteristics in friction stir processed AA6061-ZrO2-GNP surface composite, Advances in Materials and Processing Technologies, 2024 Optimization of process parameters for improved surface characteristics in friction stir processed AA6061-ZrO2-GNP surface composite .
  40. M. Manikandan, G. Kumaresan, R. Velraj and T. Sundararajan, Effect of a black paint coated double layer cellulose sponge as an absorber in a solar interfacial distillation: an experimental investigation, Energy Sources, Part A: Recovery, Utilization and Environmental Effects, 2024 Effect of a black paint coated double layer cellulose sponge as an absorber in a solar interfacial distillation: an experimental investigation (1) : pp36-49 .
  41. M. Mohan, M. Radhakrishnan and Y. Natarajan, Investigation of process parameters influence in waterjet peening of AZ31B-Mg alloy for bioimplant applications, Surface Engineering, 2024 Investigation of process parameters influence in waterjet peening of AZ31B-Mg alloy for bioimplant applications (3) : pp320-335 .
  42. M. Radhakrishnan, M. Mohan and Y. Natarajan, Effect of process parameters involved in SWJP on surface integrity and biocompatibility characteristics of AZ31B Mg alloy, Journal of Manufacturing Processes, 2024 Effect of process parameters involved in SWJP on surface integrity and biocompatibility characteristics of AZ31B Mg alloy : pp213-231 .
  43. M. Vasumathi, S.R. Begum, M.S. Kumar, N.M. Kiran and C.-H. Yang, Enhancement of vibrational performance and corrosion behavior of hybrid AMC fabricated from aluminum alloy wheel scrap reinforced with SiC and snail shell particles via vortex casting, Biomass Conversion and Biorefinery, 2024 Enhancement of vibrational performance and corrosion behavior of hybrid AMC fabricated from aluminum alloy wheel scrap reinforced with SiC and snail shell particles via vortex casting (16) : pp19461-19477 .
  44. M. Vasumathi, S.R. Begum, P. Gokul Nath, V. Kavimani, V. Romanovski and B. Salah, Insights on the bearing response of glass fiber-reinforced stainless steel laminates: Investigating the influence of natural fiber and specimen geometry, Polymer Composites, 2024 Insights on the bearing response of glass fiber-reinforced stainless steel laminates: Investigating the influence of natural fiber and specimen geometry .
  45. M. Vasumathi, S.R. Begum, P. Gokul Nath, V. Kavimani, V. Romanovski and B. Salah, Insights on the bearing response of glass fiber-reinforced stainless steel laminates: Investigating the influence of natural fiber and specimen geometry, Polymer Composites, 2024 Insights on the bearing response of glass fiber-reinforced stainless steel laminates: Investigating the influence of natural fiber and specimen geometry (11) : pp10022-10033 .
  46. M.S. Kumar, C.-H. Yang, V. Aravinthan, A.A. Adediran, S.R. Begum, M. Vasumathi and T.C. Jen, Influence of low heat input by CMT powered WAAM on attaining the microstructural and mechanical homogeneity of printed 304 SS cylindrical component, Results in Engineering, 2024 Influence of low heat input by CMT powered WAAM on attaining the microstructural and mechanical homogeneity of printed 304 SS cylindrical component .
  47. M.S. Kumar, C.-H. Yang, V. Aravinthan, A.A. Adediran, S.R. Begum, M. Vasumathi and T.C. Jen, Influence of low heat input by CMT powered WAAM on attaining the microstructural and mechanical homogeneity of printed 304 SS cylindrical component, Results in Engineering, 2024 Influence of low heat input by CMT powered WAAM on attaining the microstructural and mechanical homogeneity of printed 304 SS cylindrical component .
  48. P. GaneshKumar, V. Sivalingam, S. Divya, T.H. Oh, V.S. Vigneswaran and R. Velraj, Thermophysical exploration: State-of-the-art review on phase change materials for effective thermal management in lithium-ion battery systems, Journal of Energy Storage, 2024 Thermophysical exploration: State-of-the-art review on phase change materials for effective thermal management in lithium-ion battery systems .
  49. P. GaneshKumar, V.S. Vigneswaran, P. Murugan, M. Cheralathan, R. Velraj, S.C. Kim and V. Ramkumar, Exploring the thermal performance of a solar air heater with a V-corrugated and shot-blasted absorber plate comprising nano-enhanced phase change materials, Journal of Energy Storage, 2024 Exploring the thermal performance of a solar air heater with a V-corrugated and shot-blasted absorber plate comprising nano-enhanced phase change materials .
  50. R. Manoj Samson, T. Deepan Bharathi Kannan and C. Shravan Kumar, The effect of heat input on weld-bead geometry, mechanical, phase transformation temperature, and corrosion properties of autogenous double pulse TIG welded nitinol sheets, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 2024 The effect of heat input on weld-bead geometry, mechanical, phase transformation temperature, and corrosion properties of autogenous double pulse TIG welded nitinol sheets .
  51. R.B. Natarajan, J. Jancirani, B. Vasanthan and J. Jeevamalar, ADVANCES IN NANOMATERIALS AS LUBRICANT ADDITIVES: A SYSTEMIC REVIEW, Surface Review and Letters, 2024 ADVANCES IN NANOMATERIALS AS LUBRICANT ADDITIVES: A SYSTEMIC REVIEW .
  52. R.B. S, V. M, V. Karupaiah and V. Narayanan, Effect of process parameters on mechanical and tribological characteristics of FDM printed glass fiber reinforced PLA composites, Rapid Prototyping Journal, 2024 Effect of process parameters on mechanical and tribological characteristics of FDM printed glass fiber reinforced PLA composites .
  53. S. Gejendhiran, A. Karpagaraj, S. Manivannan, S. Shiva and T. Deepan Bharathi Kannan, Experimental study on mechanical, damping and corrosion properties of Inconel 718 hard-faced stainless steel 304 using cold metal transfer, Engineering Failure Analysis, 2024 Experimental study on mechanical, damping and corrosion properties of Inconel 718 hard-faced stainless steel 304 using cold metal transfer .
  54. S. Karthikeyan, R. Velraj and R. Senthil, Overview of numerical, experimental and parametric studies on the spherical container-based packed bed latent heat storage, Journal of Energy Storage, 2024 Overview of numerical, experimental and parametric studies on the spherical container-based packed bed latent heat storage .
  55. S. Srinath, T.D.B. Kannan and R. Santhanakrishnan, Process Parameter Optimization and Metallurgical Characterization in Double Pulse MIG Welding of SS 304 H, Transactions of the Indian Institute of Metals, 2024 Process Parameter Optimization and Metallurgical Characterization in Double Pulse MIG Welding of SS 304 H .
  56. S. Thamizh Selvan, M. Mohandass and V.S. Senthil Kumar, Pattern optimization for 3D printing of composite filament materials with natural fibers and polylactic acid, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 2024 Pattern optimization for 3D printing of composite filament materials with natural fibers and polylactic acid .
  57. S. Thayumanavan, R. Santhanakrishnan and T.D.B. Kannan, Experimental Investigation on Single Pulse MIG Welding of Inconel 617, Transactions of the Indian Institute of Metals, 2024 Experimental Investigation on Single Pulse MIG Welding of Inconel 617 (1) : pp105-117 .
  58. T. Dhilipkumar, M. Vasumathi, S.R. Begum, P. Sathyaseelan, B.K. Gnanavel and A.A. Ghfar, Evaluation of Acoustic and Structural Behavior of Banana Fiber Reinforced Polymer Composites, Fibers and Polymers, 2024 Evaluation of Acoustic and Structural Behavior of Banana Fiber Reinforced Polymer Composites (6) : pp2303-2314 .
  59. T. Dhilipkumar, M. Vasumathi, S.R. Begum, P. Sathyaseelan, B.K. Gnanavel and A.A. Ghfar, Evaluation of Acoustic and Structural Behavior of Banana Fiber Reinforced Polymer Composites, Fibers and Polymers, 2024 Evaluation of Acoustic and Structural Behavior of Banana Fiber Reinforced Polymer Composites (6) : pp2303-2314 .
  60. V. Babu, N. Thangapandian, A. Chidambaram and B.P. Shanmugavel, Optimization of Process Parameters of Cyclic Expansion Extrusion Process for Effective Grain Refinement of Al-Mg-Si Alloy, Journal of Materials Engineering and Performance, 2024 Optimization of Process Parameters of Cyclic Expansion Extrusion Process for Effective Grain Refinement of Al-Mg-Si Alloy .
  61. V. Sharma, A. Kalam Hossain, G. Griffiths, J. Cherukkattu Manayil, R. Vinu and G. Duraisamy, Investigation of anaerobic digested pyrolysis oil and waste derived biodiesel blends as sustainable fuel for marine engine application, Fuel, 2024 Investigation of anaerobic digested pyrolysis oil and waste derived biodiesel blends as sustainable fuel for marine engine application .
  62. V.V. Veerapandian and B.P. Shanmugavel, On the effects of B4C addition on the microstructure, mechanical properties, wear and thermal stability of TiCN- Co -Cr3C2-Si3N4 cermets developed by vacuum hot pressing, International Journal of Refractory Metals and Hard Materials, 2024 On the effects of B4C addition on the microstructure, mechanical properties, wear and thermal stability of TiCN- Co -Cr3C2-Si3N4 cermets developed by vacuum hot pressing .
  63. A. Abbasali Ayubali, B. Prabu Shanmugavel and K.A. Padmanabhan, On material-agnostic fatigue life prediction using Buckingham Pi Theorem, Engineering Fracture Mechanics, 2023 On material-agnostic fatigue life prediction using Buckingham Pi Theorem .
  64. A. Kumar Thakur, R. Sathyamurthy, R. Velraj, R. Saidur, A.K. Pandey, Z. Ma, P. Singh, S.K. Hazra, S. Wafa Sharshir, R. Prabakaran, S.C. Kim, S. Panchal and H.M. Ali, A state-of-the art review on advancing battery thermal management systems for fast-charging, Applied Thermal Engineering, 2023 A state-of-the art review on advancing battery thermal management systems for fast-charging .
  65. A. Mystica and V.S. Senthil Kumar, Microstructure and mechanical properties of friction stir welded AA2014 alloy under n-MQL, Journal of Central South University, 2023 Microstructure and mechanical properties of friction stir welded AA2014 alloy under n-MQL (4) : pp1047-1063 .
  66. A. Mystica, V.S. Senthil Kumar and C. Rathinasuriyan, A REVIEW ON THE INFLUENCE OF COOLING APPLICATIONS IN FRICTION STIR WELDING PROCESS, Surface Review and Letters, 2023 A REVIEW ON THE INFLUENCE OF COOLING APPLICATIONS IN FRICTION STIR WELDING PROCESS .
  67. A. Mystica, V.S. Senthil Kumar and K.A. Padmanabhan, On the friction stir welding of alloy AA2014 under n-MQL cooling condition, Journal of Adhesion Science and Technology, 2023 On the friction stir welding of alloy AA2014 under n-MQL cooling condition (13) : pp2025-2045 .
  68. A. Pachiappan and S.K.V. Santhanam, Mechanical behavior of snake grass fiber with neem gum filler hybrid composite, Polimeros, 2023 Mechanical behavior of snake grass fiber with neem gum filler hybrid composite (3) .
  69. A. Shyam, K.R. Arshad Ahmed, S. Iniyan and R. Goic, Experimental investigation in a solar parabolic trough collector with optimized secondary optics, Energy Sources, Part A: Recovery, Utilization and Environmental Effects, 2023 Experimental investigation in a solar parabolic trough collector with optimized secondary optics (2) : pp5994-6009 .
  70. A.L.K. Bharathi, S.I. Hussain and S. Kalaiselvam, Performance evaluation of various fiber paper matrix desiccant wheels coated with nano-adsorbent for energy efficient dehumidification, International Journal of Refrigeration, 2023 Performance evaluation of various fiber paper matrix desiccant wheels coated with nano-adsorbent for energy efficient dehumidification : pp416-429 .
  71. A.R. Chidambaram, A. Krishnasamy, G. Duraisamy and A.K. Hossain, Investigations on reactivity controlled compression ignition combustion with different injection strategies using alternative fuels produced from waste resources, International Journal of Engine Research, 2023 Investigations on reactivity controlled compression ignition combustion with different injection strategies using alternative fuels produced from waste resources (9) : pp4063-4076 .
  72. B. Dharmalingam, M. Sriariyanun, A. Ramanathan, A. Santhoshkumar, S. Ramalingam, R. Deepakkumar and K. Bhattacharya, A Comprehensive Review of Bio-catalyst Synthesis, Characterization, and Feedstock Selection for Biodiesel Synthesis Using Different Methods, Waste to Profit: Environmental Concerns and Sustainable Development, 2023 A Comprehensive Review of Bio-catalyst Synthesis, Characterization, and Feedstock Selection for Biodiesel Synthesis Using Different Methods : pp261-270 .
  73. B. Dharmalingam, R. Deepakkumar, K. Bhattacharya, M. Paulraj Gundupalli and M. Sriariyanun, Prediction of split injection strategy assisted diesel engine combustion, performance and emission characteristics fuelled waste frying oil methyl ester through central composite design, Materials Today: Proceedings, 2023 Prediction of split injection strategy assisted diesel engine combustion, performance and emission characteristics fuelled waste frying oil methyl ester through central composite design : pp2965-2970 .
  74. B. Dharmalingam, S. Annamalai, S. Areeya, K. Rattanaporn, K. Katam, P.-L. Show and M. Sriariyanun, Bayesian Regularization Neural Network-Based Machine Learning Approach on Optimization of CRDI-Split Injection with Waste Cooking Oil Biodiesel to Improve Diesel Engine Performance, Energies, 2023 Bayesian Regularization Neural Network-Based Machine Learning Approach on Optimization of CRDI-Split Injection with Waste Cooking Oil Biodiesel to Improve Diesel Engine Performance (6) .
  75. B. Dharmalingam, S. Balamurugan, U. Wetwatana, V. Tongnan, C. Sekhar, B. Paramasivam, K. Cheenkachorn, A. Tawai and M. Sriariyanun, Comparison of neural network and response surface methodology techniques on optimization of biodiesel production from mixed waste cooking oil using heterogeneous biocatalyst, Fuel, 2023 Comparison of neural network and response surface methodology techniques on optimization of biodiesel production from mixed waste cooking oil using heterogeneous biocatalyst .
  76. B. Dharmalingam, S. Ramalingam, A. Santhoshkumar, M. Paulraj Gundupalli and M. Sriariyanun, A review on different additives and advanced injection strategy on diesel engine characteristics fuelled with first, second and third generation biodiesel, Materials Today: Proceedings, 2023 A review on different additives and advanced injection strategy on diesel engine characteristics fuelled with first, second and third generation biodiesel : pp2909-2914 .
  77. B.P. Shanmugavel, A. Swaminathan, M. Dhayalan, S.C. Jawahar and P.V. Soundaraj, Effect of high-temperature annealing on mechanical properties of spark plasma sintered TiCN-15WC-5Cr3C2-5 nano-TiB2 cermets modified with cobalt, Journal of the Australian Ceramic Society, 2023 Effect of high-temperature annealing on mechanical properties of spark plasma sintered TiCN-15WC-5Cr3C2-5 nano-TiB2 cermets modified with cobalt (1) : pp221-229 .
  78. B.P. Shanmugavel, S.H. Senthil Kumar, C.N. Aruna and M.V. Ramesh, Development of TiCN-Co-Cr3C2-Si3N4-based cermets with improved hardness and toughness for cutting tool applications, Powder Metallurgy, 2023 Development of TiCN-Co-Cr3C2-Si3N4-based cermets with improved hardness and toughness for cutting tool applications (5) : pp571-581 .
  79. C. Rathinasuriyan, R. Sankar and V.S. Senthil Kumar, EFFECTS OF SHOT PENNING ON MECHANICAL PROPERTIES, MICROSTRUCTURAL EVOLUTION AND RESIDUAL STRESS OF SUBMERGED FRICTION STIR-WELDED AA6061-T6 ALLOY, Surface Review and Letters, 2023 EFFECTS OF SHOT PENNING ON MECHANICAL PROPERTIES, MICROSTRUCTURAL EVOLUTION AND RESIDUAL STRESS OF SUBMERGED FRICTION STIR-WELDED AA6061-T6 ALLOY (3) .
  80. D. Sarukasan and T. Krishnamurthy, An investigation of basalt/E-glass hybrid composite pipe on drilling using Box–Behnken design, Materials and Manufacturing Processes, 2023 An investigation of basalt/E-glass hybrid composite pipe on drilling using Box–Behnken design (9) : pp1104-1118 .
  81. G. Praveen Kumar, D.S. Ayou, C. Narendran, R. Saravanan, M.P. Maiya and A. Coronas, Renewable heat powered polygeneration system based on an advanced absorption cycle for rural communities, Energy, 2023 Renewable heat powered polygeneration system based on an advanced absorption cycle for rural communities .
  82. G.K. Poongavanam, R. Prabakaran, M. Salman, R. Velraj and S.C. Kim, Exploring the performance of a novel solar water heater by combining three augmentation approaches (nanofluids, absorber roughness, and surface coating), Case Studies in Thermal Engineering, 2023 Exploring the performance of a novel solar water heater by combining three augmentation approaches (nanofluids, absorber roughness, and surface coating) .
  83. G.R. Kannan, P. Sathiya, T.D.B. Kannan and M.B. Kumar, Welding Parameter Optimization by Whale Optimization Algorithm and Experimental Investigation on Microstructure and Mechanical Properties of Spin Arc Welded 15CDV6 HSLA Steel, Metals and Materials International, 2023 Welding Parameter Optimization by Whale Optimization Algorithm and Experimental Investigation on Microstructure and Mechanical Properties of Spin Arc Welded 15CDV6 HSLA Steel .
  84. G.V.K. Natarajan, A. Ragothuman, H.R. Sarfoji and B.P. Shanmugavel, Wear and high-temperature stability of TiCN-WC-Co-Cr3C2-HfC-Si3N4 cermets, Journal of the Australian Ceramic Society, 2023 Wear and high-temperature stability of TiCN-WC-Co-Cr3C2-HfC-Si3N4 cermets .
  85. K. Arul and V.S. Senthilkumar, Investigation Of Chip Morphology On Turning Of Monel Under Nanographene And Nano CuO Coolants, Surface Review and Letters, 2023 Investigation Of Chip Morphology On Turning Of Monel Under Nanographene And Nano CuO Coolants (2) .
  86. K. Cheenkachorn, R.Q. Mensah, B. Dharmalingam, M.P. Gundupalli, K. Rattanaporn, P. Tantayotai, P.L. Show and M. Sriariyanun, The Versatility of Mixed Lignocellulose Feedstocks for Bioethanol Production: an Experimental Study and Empirical Prediction, Bioenergy Research, 2023 The Versatility of Mixed Lignocellulose Feedstocks for Bioethanol Production: an Experimental Study and Empirical Prediction .
  87. K. Muninathan and M. Venkata Ramanan, Enhancement of Sapindus trifoliatus (soapnut) biodiesel yield, engine performance, and reduce emissions using Mg-doped CaO nanocatalyst, Journal of Renewable and Sustainable Energy, 2023 Enhancement of Sapindus trifoliatus (soapnut) biodiesel yield, engine performance, and reduce emissions using Mg-doped CaO nanocatalyst (2) .
  88. K. Srithar, K. Akash, R. Nambi, M. Vivar and R. Saravanan, Enhancing photovoltaic efficiency through evaporative cooling and a solar still, Solar Energy, 2023 Enhancing photovoltaic efficiency through evaporative cooling and a solar still .
  89. K. Thiruselvam, M.D. Mohan Gift, R. Saravanan and N. Subramonian, Investigation of usage of neat palm biodiesel in CI engine using cerium oxide nanoparticle addition to the fuel, International Journal of Ambient Energy, 2023 Investigation of usage of neat palm biodiesel in CI engine using cerium oxide nanoparticle addition to the fuel (1) : pp1396-1405 .
  90. K. Thiruselvam, R. Saravanan and M.D. Mohan Gift, Experimental analysis of the combined effect of thermal barrier coating material and the nanoparticle augmented fuel usage on CI engine characteristics, Materials Today: Proceedings, 2023 Experimental analysis of the combined effect of thermal barrier coating material and the nanoparticle augmented fuel usage on CI engine characteristics : pp2351-2357 .
  91. M. Abeens, M. Premnath, M. Kavin Robert, A. Sriraman, R. Renjith kumar and R. Muruganandhan, Investigation on the effect of low pulsed laser shock peening on corrosion behavior of 316 L stainless steel, Materials Today: Proceedings, 2023 Investigation on the effect of low pulsed laser shock peening on corrosion behavior of 316 L stainless steel .
  92. M. Abeens, M. Premnath, M. Kavin Robert, A. Sriraman, R. Renjith kumar and R. Muruganandhan, Investigation on the effect of low pulsed laser shock peening on corrosion behavior of 316 L stainless steel, Materials Today: Proceedings, 2023 Investigation on the effect of low pulsed laser shock peening on corrosion behavior of 316 L stainless steel .
  93. M. Avadi Ammal, J. Sudha, R. Vaishnavi and S.H. Vaishnavi, Effect of Aging Treatment on Friction Stir Processed Al-ZrO2-Graphene Nanoplatelet Surface Composite, Journal of Materials Engineering and Performance, 2023 Effect of Aging Treatment on Friction Stir Processed Al-ZrO2-Graphene Nanoplatelet Surface Composite .
  94. M. Bhuvanesh and S. Kalaiselvam, Enhanced Oil Recovery by Polymer Flooding Using Polyacrylamide Stabilised with Alumina/Graphene Oxide Nanocomposite, Arabian Journal for Science and Engineering, 2023 Enhanced Oil Recovery by Polymer Flooding Using Polyacrylamide Stabilised with Alumina/Graphene Oxide Nanocomposite (12) : pp16819-16830 .
  95. M. Puviyarasan, C. Rathinasuriyan, L. Karthikeyan and V.S. Senthil Kumar, EFFECT of PROCESS PARAMETERS on the MECHANICAL and WEAR PROPERTIES of AA6061/B4Cp COMPOSITES FABRICATED USING FRICTION STIR PROCESSING, Surface Review and Letters, 2023 EFFECT of PROCESS PARAMETERS on the MECHANICAL and WEAR PROPERTIES of AA6061/B4Cp COMPOSITES FABRICATED USING FRICTION STIR PROCESSING (9) .
  96. M. Vasumathi, S.R. Begum, M.S. Kumar, N.M. Kiran and C.-H. Yang, Enhancement of vibrational performance and corrosion behavior of hybrid AMC fabricated from aluminum alloy wheel scrap reinforced with SiC and snail shell particles via vortex casting, Biomass Conversion and Biorefinery, 2023 Enhancement of vibrational performance and corrosion behavior of hybrid AMC fabricated from aluminum alloy wheel scrap reinforced with SiC and snail shell particles via vortex casting .
  97. M.A. Khan, B. Dharmalingam, S. Chuetor, Y.-S. Cheng and M. Sriariyanun, Comprehensive review on effective conversion of lignocellulosic biomass to levulinic acid, Biomass Conversion and Biorefinery, 2023 Comprehensive review on effective conversion of lignocellulosic biomass to levulinic acid .
  98. P. Ganesh Kumar, V.S. Vigneswaran, V. Sivalingam, R. Velraj, S.C. Kim and V. Ramkumar, Enhancing heat transfer performance of automotive radiator with H2O / activated carbon nanofluids, Journal of Molecular Liquids, 2023 Enhancing heat transfer performance of automotive radiator with H2O / activated carbon nanofluids .
  99. R. Ganesan, G. Sankaranarayanan, M. Pradeep Kumar and V.K. Bupesh Raja, Up-Sampled Cross-Correlation Based Object Tracking & Vibration Measurement in Agriculture Tractor System, Intelligent Automation and Soft Computing, 2023 Up-Sampled Cross-Correlation Based Object Tracking & Vibration Measurement in Agriculture Tractor System (1) : pp667-681 .
  100. R. K and V.S. Senthil Kumar, Evaluation of process parameter of friction stir processing of AA2024-T351 Alloy using RSM and GRA, Journal of Adhesion Science and Technology, 2023 Evaluation of process parameter of friction stir processing of AA2024-T351 Alloy using RSM and GRA .
  101. R. Santosh, G. Kumaresan, C.K. Pon Pavithiran, P. Mathu and R. Velraj, Effect of geometric variation and solar flux distribution on performance enhancement of absorber tube thermal characteristics for compound parabolic collectors, Renewable Energy, 2023 Effect of geometric variation and solar flux distribution on performance enhancement of absorber tube thermal characteristics for compound parabolic collectors : pp671-686 .
  102. S. Anandaraj, M. Ayyasamy, F.P.G. Marquez and M.M. Athikesavan, Experimental studies of different operating parameters on the photovoltaic thermal system using a flattened geometrical structure, Environmental Science and Pollution Research, 2023 Experimental studies of different operating parameters on the photovoltaic thermal system using a flattened geometrical structure (1) : pp1116-1132 .
  103. S. Chandra Sekhar, M. Sreenivasulu, M. Sriariyanun, B. Dharmalingam and K. Sathiyamoorthy, Methyl Esters of Vitis Vinifera seed oil and Al2O3 nano additives impact on DI diesel engine performance and emissions, Materials Today: Proceedings, 2023 Methyl Esters of Vitis Vinifera seed oil and Al2O3 nano additives impact on DI diesel engine performance and emissions : pp1185-1189 .
  104. S. Gokulkumar, T. Kannan, N. Karthi, S. Sathish, L. Prabhu, M. Aravindh and J. Alex, Development and Characterization of Glycine Max Seed Powder Blended with Unidirectional Agave Fourcroydes Reinforced Epoxy Nanocomposite, Springer Proceedings in Materials, 2023 Development and Characterization of Glycine Max Seed Powder Blended with Unidirectional Agave Fourcroydes Reinforced Epoxy Nanocomposite : pp159-172 .
  105. S. Joyson Selvakumar and D. Samuel Raj, Machinability analysis during finish turning Ti6Al4V with varying cutting edge radius, Materials and Manufacturing Processes, 2023 Machinability analysis during finish turning Ti6Al4V with varying cutting edge radius .
  106. S. Joyson Selvakumar, P. Sakthivel, J.A. Praveen and D. Samuel Raj, Effect of edge radius on forces, tool wear and surface integrity under edge radius dominated tool-chip contact conditions, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2023 Effect of edge radius on forces, tool wear and surface integrity under edge radius dominated tool-chip contact conditions .
  107. S. Joyson Selvakumar, S. Muthiah Muralidharan and S.R. D., Performance analysis of drills with structured surfaces when drilling CFRP/AA7075 stack under MQL condition, Journal of Manufacturing Processes, 2023 Performance analysis of drills with structured surfaces when drilling CFRP/AA7075 stack under MQL condition : pp194-219 .
  108. S. Karpagarajan, C. Balamurugan, S. Vigneshwaran and E.-S.I. Abdel Aziz, Effect of volume fraction on microstructure and wear behavior of dual-phase brass/W surface composites fabricated via friction stir processing, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 2023 Effect of volume fraction on microstructure and wear behavior of dual-phase brass/W surface composites fabricated via friction stir processing (7) : pp1562-1574 .
  109. U.H. Kumar, S.I. Hussain and S. Kalaiselvam, Energy-efficient low-temperature activated desiccant wheels with nano-desiccant-coated fiber matrix, Journal of Thermal Analysis and Calorimetry, 2023 Energy-efficient low-temperature activated desiccant wheels with nano-desiccant-coated fiber matrix (21) : pp11511-11533 .
  110. V. Ashok Kumar, K. Muninathan, S. Arivazhagan, N. Monish, M. Venkata Ramanan, V. Seshagiri Rao and G. Baskar, Investigations on carbonization operating conditions of ANSYS customized kiln for charcoal production from Prosopis juliflora biomass and ANN model prediction for optimized operating conditions, Fuel, 2023 Investigations on carbonization operating conditions of ANSYS customized kiln for charcoal production from Prosopis juliflora biomass and ANN model prediction for optimized operating conditions .
  111. V. Babu, B.P. Shanmugavel and K.A. Padmanabhan, On the Role of Semi-Die Angle in Multi-Pass Cyclic Expansion Extrusion: Effects on Microstructure and Mechanical Properties of AA 6063, Metals and Materials International, 2023 On the Role of Semi-Die Angle in Multi-Pass Cyclic Expansion Extrusion: Effects on Microstructure and Mechanical Properties of AA 6063 .
  112. V. Ezhilmaran, P. Suya Prem Anand, S. Kannan, N. Sivashanmugam, K. Jayakrishna and G. Kalusuraman, Review of bioresorbable AZ91, AZ31 and Mg–Zn–Ca implants and their manufacturing methods, Materials Science and Technology (United Kingdom), 2023 Review of bioresorbable AZ91, AZ31 and Mg–Zn–Ca implants and their manufacturing methods (8) : pp901-925 .
  113. V. Pranesh, R. Velraj and V. Kumaresan, Experimental investigations on a sensible heat thermal energy storage system towards the design of cascaded latent heat storage system, International Journal of Green Energy, 2023 Experimental investigations on a sensible heat thermal energy storage system towards the design of cascaded latent heat storage system (1) : pp63-76 .
  114. V. Sathiya, K. Nagalakshmi, J. Jeevamalar, R. Anand Babu, R. Karthi, Á. Acevedo-Duque, R. Lavanya and S. Ramabalan, Reshaping healthcare supply chain using chain-of-things technology and key lessons experienced from COVID-19 pandemic, Socio-Economic Planning Sciences, 2023 Reshaping healthcare supply chain using chain-of-things technology and key lessons experienced from COVID-19 pandemic .
  115. V. Sharma, A.K. Hossain, G. Duraisamy and G. Griffiths, Microalgal Biodiesel: A Challenging Route toward a Sustainable Aviation Fuel, Fermentation, 2023 Microalgal Biodiesel: A Challenging Route toward a Sustainable Aviation Fuel (10) .
  116. V. Sharma, A.K. Hossain, G. Duraisamy and J.J. Thomas, Sustainable biodiesel from flex-mix feedstock and its combustion in a VCR-CRDI engine with variable exhaust gas recirculation and injection pressure, Jphys Energy, 2023 Sustainable biodiesel from flex-mix feedstock and its combustion in a VCR-CRDI engine with variable exhaust gas recirculation and injection pressure (1) .
  117. A. Kumar Subramani, G. Duraisamy, N. Govindan and A. Krishnasamy, Understanding the combustion mode transition from CDC to RCCI and RCCI to CDC – An experimental approach, Energy Conversion and Management, 2022 Understanding the combustion mode transition from CDC to RCCI and RCCI to CDC – An experimental approach .
  118. A.K. Thakur, R. Sathyamurthy and R. Velraj, Development of candle soot dispersed phase change material for improving water generation potential of tubular solar distillation unit, Solar Energy Materials and Solar Cells, 2022 Development of candle soot dispersed phase change material for improving water generation potential of tubular solar distillation unit .
  119. A.K. Thakur, R. Sathyamurthy, R. Saidur, R. Velraj, I. Lynch and N. Aslfattahi, Exploring the potential of MXene-based advanced solar-absorber in improving the performance and efficiency of a solar-desalination unit for brackish water purification, Desalination, 2022 Exploring the potential of MXene-based advanced solar-absorber in improving the performance and efficiency of a solar-desalination unit for brackish water purification .
  120. A.K. Thakur, R. Sathyamurthy, R. Velraj and I. Lynch, Development of a novel cellulose foam augmented with candle-soot derived carbon nanoparticles for solar-powered desalination of brackish water, Environmental Science: Nano, 2022 Development of a novel cellulose foam augmented with candle-soot derived carbon nanoparticles for solar-powered desalination of brackish water (4) : pp1247-1270 .
  121. A.K. Thakur, R. Sathyamurthy, R. Velraj, R. Saidur, I. Lynch, M. Chaturvedi and S.W. Sharshir, Synergetic effect of absorber and condenser nano-coating on evaporation and thermal performance of solar distillation unit for clean water production, Solar Energy Materials and Solar Cells, 2022 Synergetic effect of absorber and condenser nano-coating on evaporation and thermal performance of solar distillation unit for clean water production .
  122. A.K. Thakur, R. Sathyamurthy, R. Velraj, R. Saidur, I. Lynch, R. Venkatesh, P.G. Kumar, S.C. Kim and M. Sillanpää, A novel solar absorber using activated carbon nanoparticles synthesized from bio-waste for the performance improvement of solar desalination unit, Desalination, 2022 A novel solar absorber using activated carbon nanoparticles synthesized from bio-waste for the performance improvement of solar desalination unit .
  123. B. Dharmalingam, P. Tantayotai, E.J. Panakkal, K. Cheenkachorn, S. Kirdponpattara, M.P. Gundupalli, Y.-S. Cheng and M. Sriariyanun, Organic Acid Pretreatments and Optimization Techniques for Mixed Vegetable Waste Biomass Conversion into Biofuel Production, Bioenergy Research, 2022 Organic Acid Pretreatments and Optimization Techniques for Mixed Vegetable Waste Biomass Conversion into Biofuel Production .
  124. B. Hariprasad, S.J. Selvakumar and D. Samuel Raj, Effect of cutting edge radius on end milling Ti–6Al–4V under minimum quantity cooling lubrication – Chip morphology and surface integrity study, Wear, 2022 Effect of cutting edge radius on end milling Ti–6Al–4V under minimum quantity cooling lubrication – Chip morphology and surface integrity study .
  125. B. Thamarai Kannan, B. Madhu, A.E. Kabeel, A.K. Thakur, R. Velraj, I. Lynch, R. Saidur and R. Sathyamurthy, Improved freshwater generation via hemispherical solar desalination unit using paraffin wax as phase change material encapsulated in waste aluminium cans, Desalination, 2022 Improved freshwater generation via hemispherical solar desalination unit using paraffin wax as phase change material encapsulated in waste aluminium cans .
  126. C. Hariharan, D. Gunadevan, S. Arun Prakash, K. Latha, V. Antony Aroul Raj and R. Velraj, Simulation of battery energy consumption in an electric car with traction and HVAC model for a given source and destination for reducing the range anxiety of the driver, Energy, 2022 Simulation of battery energy consumption in an electric car with traction and HVAC model for a given source and destination for reducing the range anxiety of the driver .
  127. C. Rathinasuriyan, V.S.S. Kumar and V. Savitha, Mechanical and Metallurgical Properties of GTAW, GMAW and FSW Lap Joints on AA6061-T6 Alloy, Advances in Materials and Processing Technologies, 2022 Mechanical and Metallurgical Properties of GTAW, GMAW and FSW Lap Joints on AA6061-T6 Alloy (3) : pp3231-3247 .
  128. C.K. Pon Pavithiran, G. Kumaresan, R. Abraham, R. Santosh and R. Velraj, Effect of Teflon-Coated PVDF Membrane on the Performance of a Solar-Powered Direct Contact Membrane Distillation System, Sustainability (Switzerland), 2022 Effect of Teflon-Coated PVDF Membrane on the Performance of a Solar-Powered Direct Contact Membrane Distillation System (11) .
  129. C.M. Vijayaragavan, P. Vanaja Ranjan and R. Velraj, Implementation Challenges: Universal R-Dump Converter for Switched Reluctance Motor, International Transactions on Electrical Energy Systems, 2022 Implementation Challenges: Universal R-Dump Converter for Switched Reluctance Motor .
  130. C.N. Kowthaman, P. Senthil Kumar, V. Arul Mozhi Selvan and D. Ganesh, A comprehensive insight from microalgae production process to characterization of biofuel for the sustainable energy, Fuel, 2022 A comprehensive insight from microalgae production process to characterization of biofuel for the sustainable energy .
  131. D. Balaji, R. Velraj and M. Ramanamurthy, THE CFD STUDIES ON THE INFLUENCE OF UN-WETTED AREA ON THE HEAT TRANSFER PERFORMANCE OF THE HORIZONTAL TUBE FALLING FILM EVAPORATION, Thermal Science, 2022 THE CFD STUDIES ON THE INFLUENCE OF UN-WETTED AREA ON THE HEAT TRANSFER PERFORMANCE OF THE HORIZONTAL TUBE FALLING FILM EVAPORATION (1) : pp25-35 .
  132. D. Sarukasan, K. Tamilarasan and K. Thirumavalavan, Investigation of in-situ cryogenic assisted machining of 2205 duplex stainless steel in AWJM, Materials Today: Proceedings, 2022 Investigation of in-situ cryogenic assisted machining of 2205 duplex stainless steel in AWJM .
  133. D. Subramaniam, R. Natesan and B.P. Shanmugavel, Development of storage bin using lantana camara flour reinforced polypropylene composites: product performance study on the composite bin for pharmaceutical applications, Journal of Polymer Research, 2022 Development of storage bin using lantana camara flour reinforced polypropylene composites: product performance study on the composite bin for pharmaceutical applications (4) .
  134. G. Duraisamy, M. Rangasamy and A. K. Hossain, A study on flexible dual-fuel and flexi combustion mode engine to mitigate NO, soot and unburned emissions, Fuel, 2022 A study on flexible dual-fuel and flexi combustion mode engine to mitigate NO, soot and unburned emissions .
  135. G.J. Bain and D.S. Raj, Effect of EDMed rake face grooves on the chip breaking capability of twist drills during deep hole drilling of Al 6061 aluminum alloy, Materials and Manufacturing Processes, 2022 Effect of EDMed rake face grooves on the chip breaking capability of twist drills during deep hole drilling of Al 6061 aluminum alloy (9) : pp1052-1072 .
  136. G.S. Sivagnanamani, S.R. Begum, R. Siva and M.S. Kumar, Experimental Investigation on Influence of Waste Egg Shell Particles on Polylactic Acid Matrix for Additive Manufacturing Application, Journal of Materials Engineering and Performance, 2022 Experimental Investigation on Influence of Waste Egg Shell Particles on Polylactic Acid Matrix for Additive Manufacturing Application (5) : pp3471-3480 .
  137. H.Z. Afra Fathima, C.K. Kevin, K.S. Kishore and J. Sudha, Influence of B4C and TiN on the microstructure and wear behavior of friction stir processed AA7075 surface composite, Surface Review and Letters, 2022 Influence of B4C and TiN on the microstructure and wear behavior of friction stir processed AA7075 surface composite (12) .
  138. J. Arivarasan and T.D.B. Kannan, Optimization of Process Parameters in Double-Pulse MIG Welding of Inconel 617-SS 304 H, Transactions of the Indian Institute of Metals, 2022 Optimization of Process Parameters in Double-Pulse MIG Welding of Inconel 617-SS 304 H (5) : pp1293-1307 .
  139. J. Solomon, V. Kugarajah, P. Ganesan and S. Dharmalingam, Enhancing power generation by maintaining operating temperature using Phase Change Material for Microbial Fuel Cell application, Journal of Environmental Chemical Engineering, 2022 Enhancing power generation by maintaining operating temperature using Phase Change Material for Microbial Fuel Cell application (1) .
  140. J. Sudha, S. Arun Raj, M. Muthunishabegum and Padmashreekrishna, EXPERIMENTAL INVESTIGATION ON WATER JET PEENED 316L STAINLESS STEEL WELD PLATES, Academic Journal of Manufacturing Engineering, 2022 EXPERIMENTAL INVESTIGATION ON WATER JET PEENED 316L STAINLESS STEEL WELD PLATES (1) : pp42-46 .
  141. J.J. Thomas, G. Nagarajan, V.R. Sabu, C.V. Manojkumar and V. Sharma, Performance and emissions of hexanol-biodiesel fuelled RCCI engine with double injection strategies, Energy, 2022 Performance and emissions of hexanol-biodiesel fuelled RCCI engine with double injection strategies .
  142. J.V. Tilak Kumar, S. Jayaprakasam, V.S. Senthil Kumar, K.A. Padmanabhan, A. Frolova and V. Stolyarov, On the microstructure and tensile behaviour of nanostructured NiTi alloy produced by electroplastic rolling, Letters on Materials, 2022 On the microstructure and tensile behaviour of nanostructured NiTi alloy produced by electroplastic rolling (2) : pp83-88 .
  143. J.V. Tilak Kumar, S. Jayaprakasam, V.S. Senthil Kumar, K.A. Padmanabhan, A. Frolova and V. Stolyarov, On the microstructure and tensile behaviour of nanostructured NiTi alloy produced by electroplastic rolling, Letters on Materials, 2022 On the microstructure and tensile behaviour of nanostructured NiTi alloy produced by electroplastic rolling (2) : pp83-88 .
  144. K. Arun, M. Venkata Ramanan and S. Mohanasutan, Comparative studies and analysis on gasification of coconut shells and corn cobs in a perforated fixed bed downdraft reactor by admitting air through equally spaced conduits, Biomass Conversion and Biorefinery, 2022 Comparative studies and analysis on gasification of coconut shells and corn cobs in a perforated fixed bed downdraft reactor by admitting air through equally spaced conduits (4) : pp1257-1269 .
  145. K. Muninathan, M. Venkata Ramanan, G. Baskar and N. Rajendran, Biodiesel Production from Sapindus Trifoliatus oil using Mg doped CaO Heterogeneous Nanocatalyst, Energy Sources Part A Recovery Utilization and Environmental Effects, 2022 Biodiesel Production from Sapindus Trifoliatus oil using Mg doped CaO Heterogeneous Nanocatalyst (3) : pp6099-6110 .
  146. K. Sudarvelazhagan, K. Srinivas, M. Pradeep Kumar and G.A. Ramadass, Experimental investigation and optimization of polymetallic nodule mining by mechanical pick-up device on deep-sea using RSM, Marine Georesources and Geotechnology, 2022 Experimental investigation and optimization of polymetallic nodule mining by mechanical pick-up device on deep-sea using RSM .
  147. K. Thirumavalavan and D. Sarukasan, Experimental investigation on multi-layered filament wound basalt/E-glass hybrid fiber composite tubes, Materials Research Express, 2022 Experimental investigation on multi-layered filament wound basalt/E-glass hybrid fiber composite tubes (4) .
  148. K. Venkatesan and M. Venkata Ramanan, Design and performance evaluation of thermoelectric cooling system integrated with PCM (phase change material), International Journal of Ambient Energy, 2022 Design and performance evaluation of thermoelectric cooling system integrated with PCM (phase change material) (1) : pp8750-8762 .
  149. K.R. Sureshkumar, P.R. Yadav, K. Karthikeyan, K.K. Nagachandrika, N. Sadasivan, N. Gnaneswaran, M.G. Hariharan and S. Kalaiselvam, Effects of Hybrid Nanoparticles on Thermophysical Property of Cu-TiO2 Embedded Palmitic Phase Change Material for Energy Storage Applications, International Journal of Vehicle Structures and Systems, 2022 Effects of Hybrid Nanoparticles on Thermophysical Property of Cu-TiO2 Embedded Palmitic Phase Change Material for Energy Storage Applications (4) : pp433-436 .
  150. M. Premnath, R. Muruganandhan and M. Abeens, A study on the effect of various process parameters on low pulsed energy of laser shock peening without ablative layer on the mechanical behavior of AA 7075 T651, Surface Topography: Metrology and Properties, 2022 A study on the effect of various process parameters on low pulsed energy of laser shock peening without ablative layer on the mechanical behavior of AA 7075 T651 (1) .
  151. M. Saravana Kumar, C.I. Pruncu, P. Harikrishnan, S. Rashia Begum and M. Vasumathi, Experimental Investigation of In-homogeneity in Particle Distribution During the Processing of Metal Matrix Composites, Silicon, 2022 Experimental Investigation of In-homogeneity in Particle Distribution During the Processing of Metal Matrix Composites (2) : pp629-641 .
  152. M. Saravana Kumar, C.I. Pruncu, P. Harikrishnan, S. Rashia Begum and M. Vasumathi, Experimental Investigation of In-homogeneity in Particle Distribution During the Processing of Metal Matrix Composites, Silicon, 2022 Experimental Investigation of In-homogeneity in Particle Distribution During the Processing of Metal Matrix Composites (2) : pp629-641 .
  153. M. Sugumar and S. Dharmalingam, Statistical assessment of operational parameters using optimized sulphonated titanium nanotubes incorporated sulphonated polystyrene ethylene butylene polystyrene nanocomposite membrane for efficient electricity generation in microbial fuel cell, Energy, 2022 Statistical assessment of operational parameters using optimized sulphonated titanium nanotubes incorporated sulphonated polystyrene ethylene butylene polystyrene nanocomposite membrane for efficient electricity generation in microbial fuel cell .
  154. M. Sugumar, V. Kugarajah and S. Dharmalingam, Optimization of operational factors using statistical design and analysis of nanofiller incorporated polymer electrolyte membrane towards performance enhancement of microbial fuel cell, Process Safety and Environmental Protection, 2022 Optimization of operational factors using statistical design and analysis of nanofiller incorporated polymer electrolyte membrane towards performance enhancement of microbial fuel cell : pp474-485 .
  155. M.A. Ammal and J. Sudha, Microstructural Evolution & Mechanical Properties of ZrO2/GNP and B4C/GNP reinforced AA6061 Friction Stir Processed Surface Composites - A Comparative study, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2022 Microstructural Evolution & Mechanical Properties of ZrO2/GNP and B4C/GNP reinforced AA6061 Friction Stir Processed Surface Composites - A Comparative study .
  156. N. Thangapandian, J. Jenix Rino and B.P. Shanmugavel, Strain inhomogeneity and grain refinement in AA6063 aluminum alloy subjected to repetitive corrugation and straightening: comparison of experimental and finite element analysis, International Journal of Material Forming, 2022 Strain inhomogeneity and grain refinement in AA6063 aluminum alloy subjected to repetitive corrugation and straightening: comparison of experimental and finite element analysis (2) .
  157. P. Rathinam, S. Subburaj, A. Roseline A and S. Kalaiselvam, Quantitative resilient investigation using RIPSHA approach and ANOVA validation for the ammonia storage unit, Process Safety Progress, 2022 Quantitative resilient investigation using RIPSHA approach and ANOVA validation for the ammonia storage unit (4) : pp708-720 .
  158. P.K. G and S.R. D, Analysis of high speed drilling AISI 304 under MQL condition through a novel tool wear measurement method and surface integrity studies, Tribology International, 2022 Analysis of high speed drilling AISI 304 under MQL condition through a novel tool wear measurement method and surface integrity studies .
  159. R. Dinesh, P. Karuppasamy and S. Kalaiselvam, An experimental investigation and comprehensive modelling of thermal and rheological behaviour of graphene oxide nano platelets suspended mineral oil nano lubricant, Journal of Molecular Liquids, 2022 An experimental investigation and comprehensive modelling of thermal and rheological behaviour of graphene oxide nano platelets suspended mineral oil nano lubricant .
  160. R. Ekambaram and S. Dharmalingam, Design and development of biomimetic electrospun sulphonated polyether ether ketone nanofibrous scaffold for bone tissue regeneration applications: in vitro and in vivo study, Journal of Biomaterials Science, Polymer Edition, 2022 Design and development of biomimetic electrospun sulphonated polyether ether ketone nanofibrous scaffold for bone tissue regeneration applications: in vitro and in vivo study (8) : pp947-975 .
  161. R. Ekambaram, M. Sugumar, S. Karuppasamy, P. Prasad and S. Dharmalingam, Fabrication of wheatgrass incorporated PCL/chitosan biomimetic nanoscaffold for skin wound healing: In vitro and In silico analysis, Journal of Drug Delivery Science and Technology, 2022 Fabrication of wheatgrass incorporated PCL/chitosan biomimetic nanoscaffold for skin wound healing: In vitro and In silico analysis .
  162. R. Ekambaram, S. Saravanan, V.P.S. Babu and S. Dharmalingam, Fabrication and evaluation of Docetaxel doped ZnO nanoparticles incorporated PCL nanofibers for its hemocompatibility, cytotoxicity and apoptotic effects against A549, Materialia, 2022 Fabrication and evaluation of Docetaxel doped ZnO nanoparticles incorporated PCL nanofibers for its hemocompatibility, cytotoxicity and apoptotic effects against A549 .
  163. R. Maheswaran and B.P. Shanmugavel, A Critical Review of the Role of Carbon Nanotubes in the Progress of Next-Generation Electronic Applications, Journal of Electronic Materials, 2022 A Critical Review of the Role of Carbon Nanotubes in the Progress of Next-Generation Electronic Applications (6) : pp2786-2800 .
  164. R. Sankar, C. Rathinasuriyan, M. Puviyarasan and V.S.S. Kumar, RELATIONSHIP BETWEEN MICROSTRUCTURE, MECHANICAL PROPERTIES AND WEAR BEHAVIOR OF FRICTION STIR PROCESSED AZ31B ALLOY UNDER VARIOUS MEDIUM, Surface Review and Letters, 2022 RELATIONSHIP BETWEEN MICROSTRUCTURE, MECHANICAL PROPERTIES AND WEAR BEHAVIOR OF FRICTION STIR PROCESSED AZ31B ALLOY UNDER VARIOUS MEDIUM (6) .
  165. R. Sivaperumal, J. Jancirani, B. Vasanthan and J. Jeevamalar, Study of fiber delamination on silane modified ramie fiber/OMMTnano-clay epoxy composite under low-velocity impact, shear load, and high-speeddrilling, Polymer Composites, 2022 Study of fiber delamination on silane modified ramie fiber/OMMTnano-clay epoxy composite under low-velocity impact, shear load, and high-speeddrilling (7) : pp4280-4287 .
  166. S. Aashikkha, S. Nisha, S. Sai Anandhi, J. Sudha and N. Senthilkumar, Study on the influence of manganese and silicon carbide in Al7075 metal matrix composite produced by P/M route, Materials Today: Proceedings, 2022 Study on the influence of manganese and silicon carbide in Al7075 metal matrix composite produced by P/M route .
  167. S. Ali S, M.V. De Poures, D. Damodharan, K. Gopal, V.C. Augustin and M.R. Swaminathan, Prediction of emissions and performance of a diesel engine fueled with waste cooking oil and C8 oxygenate blends using response surface methodology, Journal of Cleaner Production, 2022 Prediction of emissions and performance of a diesel engine fueled with waste cooking oil and C8 oxygenate blends using response surface methodology .
  168. S. Dewangan, S.K. Selvaraj, B. Karthikeyan, U. Chadha, P. Singhal, P.P. Sarma, P.V. Raju, U. Kumar and M. Pradeep Kumar, Fractography analysis into low-C steel undergone through various destructive mechanical tests, Materials Research Express, 2022 Fractography analysis into low-C steel undergone through various destructive mechanical tests (12) .
  169. S. Dharmalingam and J. Solomon, Effects of biofouling on polymer electrolyte membranes in scaling-up of microbial electrochemical systems, Scaling Up of Microbial Electrochemical Systems: From Reality to Scalability, 2022 Effects of biofouling on polymer electrolyte membranes in scaling-up of microbial electrochemical systems : pp139-159 .
  170. S. Dharmalingam, V. Kugarajah and J. Solomon, Nanomaterials in biofuel cells, Nanotechnology in Fuel Cells, 2022 Nanomaterials in biofuel cells : pp411-444 .
  171. S. Gnanamani Sankaravel, R.B. Syed and V. Manivachakan, In vitro and mechanical characterization of PLA/egg shell biocomposite scaffold manufactured using fused deposition modeling technology for tissue engineering applications, Polymer Composites, 2022 In vitro and mechanical characterization of PLA/egg shell biocomposite scaffold manufactured using fused deposition modeling technology for tissue engineering applications (1) : pp173-186 .
  172. S. Kalaiselvam, A. Ameelia Roseline, R. Dinesh and S. Imran Hussain, Thermal performance of cement mortar embedded with microencapsulated phase change materials in Indian subcontinental climatic conditions, Journal of Thermal Analysis and Calorimetry, 2022 Thermal performance of cement mortar embedded with microencapsulated phase change materials in Indian subcontinental climatic conditions (24) : pp14057-14069 .
  173. S. Lakshmanan, M. Pradeep Kumar and M. Dhananchezian, Optimization of turning parameter on surface roughness, cutting force and temperature through TOPSIS, Materials Today: Proceedings, 2022 Optimization of turning parameter on surface roughness, cutting force and temperature through TOPSIS .
  174. S. Ramalingam, B. Dharmalingam, R. Deepakkumar and M. Sriariyanun, Effect of Moringa oleifera biodiesel–diesel–carbon black water emulsion blends in diesel engine characteristics, Energy Reports, 2022 Effect of Moringa oleifera biodiesel–diesel–carbon black water emulsion blends in diesel engine characteristics : pp9598-9609 .
  175. S. Rashia Begum, M. Saravana Kumar, M. Vasumathi, M. Umar Farooq and C.I. Pruncu, Revealing the compressive and flow properties of novel bone scaffold structure manufactured by selective laser sintering technique, Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 2022 Revealing the compressive and flow properties of novel bone scaffold structure manufactured by selective laser sintering technique (4) : pp526-538 .
  176. S. Rashia Begum, M. Saravana Kumar, M. Vasumathi, M. Umar Farooq and C.I. Pruncu, Revealing the compressive and flow properties of novel bone scaffold structure manufactured by selective laser sintering technique, Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 2022 Revealing the compressive and flow properties of novel bone scaffold structure manufactured by selective laser sintering technique (4) : pp526-538 .
  177. S. Rathinavel, J. Indrakumar, P.S. Korrapati and S. Dharmalingam, Synthesis and fabrication of amine functionalized SBA-15 incorporated PVA/Curcumin nanofiber for skin wound healing application, Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2022 Synthesis and fabrication of amine functionalized SBA-15 incorporated PVA/Curcumin nanofiber for skin wound healing application .
  178. S.K. Iyappan, S. Karthikeyan, K. Ravikumar, S. Makkar, K. Rutvi Uday and M. R. V, Mechanical Properties and Machinability of Aluminium and Aluminium-Silicon Carbide Composites Processed by Equal Channel Angular Pressing (ECAP), Advances in Materials and Processing Technologies, 2022 Mechanical Properties and Machinability of Aluminium and Aluminium-Silicon Carbide Composites Processed by Equal Channel Angular Pressing (ECAP) (1) : pp783-796 .
  179. S.P. Subin David, S. Veeralakshmi, M. Sakthi Priya, S. Nehru and S. Kalaiselvam, Room-temperature chemiresistive g-C3N4/Ag2ZrO3 nanocomposite gas sensor for ethanol detection, Journal of Materials Science: Materials in Electronics, 2022 Room-temperature chemiresistive g-C3N4/Ag2ZrO3 nanocomposite gas sensor for ethanol detection (14) : pp11498-11510 .
  180. S.S. Vivek, B. Karthikeyan, S.K. Selvaraj, M. Pradeep Kumar, U. Chadha, S. Das, G. Ranjani, R. Rajasakthivel, K. Tamilvendhan and T.M. Adane, A comprehensive study on physico-mechanical properties of non-metallic fibre reinforced SCC blended with metakaolin and alcofine, Materials Research Express, 2022 A comprehensive study on physico-mechanical properties of non-metallic fibre reinforced SCC blended with metakaolin and alcofine (12) .
  181. T. Kannan, B. Arulmurugan, L. Feroz Ali and L. Rajeshkumar, Performance analysis of AA3103 and AA6063 dissimilar weld joints by friction stir welding, Songklanakarin Journal of Science and Technology, 2022 Performance analysis of AA3103 and AA6063 dissimilar weld joints by friction stir welding (2) : pp316-322 .
  182. T. Mayavan, L. Karthikeyan, B. Balamugundan and V.S. Senthil Kumar, Forming of Tailor-welded Blanks Through Centerline and offset Laser welding, International Journal of Manufacturing, Materials, and Mechanical Engineering, 2022 Forming of Tailor-welded Blanks Through Centerline and offset Laser welding (1) .
  183. T.M. Krishnan, C. Balamurugan, I. Dinaharan and R. Palanivel, Influence of arc duration on microstructure and tensile behavior of magnetically impelled arc butt welded AISI 409 ferritic stainless steel tubes, Materials Science and Engineering A, 2022 Influence of arc duration on microstructure and tensile behavior of magnetically impelled arc butt welded AISI 409 ferritic stainless steel tubes .
  184. T.M. Krishnan, I. Dinaharan, R. Palanivel and C. Balamurugan, Prediction of tensile strength and assessing the influence of process parameters of magnetically impelled arc butt welded AISI 409 ferritic stainless steel tubes, International Journal of Advanced Manufacturing Technology, 2022 Prediction of tensile strength and assessing the influence of process parameters of magnetically impelled arc butt welded AISI 409 ferritic stainless steel tubes (1-2) : pp417-432 .
  185. U. Karuppusamy, D. Dakshinamurthy and R.B.S. Ibrahim, INVESTIGATION of MACHINABILITY and GEOMETRY CHARACTERISTICS of ABRASIVE WATERJET CIRCULAR CUTTING PROCESS on TI-6AL-4V ALLOY, Surface Review and Letters, 2022 INVESTIGATION of MACHINABILITY and GEOMETRY CHARACTERISTICS of ABRASIVE WATERJET CIRCULAR CUTTING PROCESS on TI-6AL-4V ALLOY (4) .
  186. V. Kugarajah, J. Solomon, K. Rajendran and S. Dharmalingam, Enhancement of nitrate removal and electricity generation in microbial fuel cell using eggshell supported biocathode, Process Biochemistry, 2022 Enhancement of nitrate removal and electricity generation in microbial fuel cell using eggshell supported biocathode : pp1-10 .
  187. V. Sharma, A. Kalam Hossain, G. Griffiths, G. Duraisamy, A. Krishnasamy, V. Ravikrishnan and J. Ricardo Sodré, Plastic waste to liquid fuel: A review of technologies, applications, and challenges, Sustainable Energy Technologies and Assessments, 2022 Plastic waste to liquid fuel: A review of technologies, applications, and challenges .
  188. V. Sharma, A.K. Hossain, G. Griffiths, G. Duraisamy and J. Jacob Thomas, Investigation on yield, fuel properties, ageing and low temperature flow of fish oil esters, Energy Conversion and Management: X, 2022 Investigation on yield, fuel properties, ageing and low temperature flow of fish oil esters .
  189. V. Sivalingam, P. Ganesh Kumar, R. Prabakaran, J. Sun, R. Velraj and S.C. Kim, An automotive radiator with multi-walled carbon-based nanofluids: A study on heat transfer optimization using MCDM techniques, Case Studies in Thermal Engineering, 2022 An automotive radiator with multi-walled carbon-based nanofluids: A study on heat transfer optimization using MCDM techniques .